A list of the contents of this article:

How can bean sprouts be planted?

1. Sowing, bean sprouts are different from other vegetables. Although planting bean sprouts in soil is not recommended, bean sprouts have a high density and are planted in the soil because of poor management. There are two kinds of broadcasting methods. Put the seed on the surface of the water intact and put a little soil into the vessel to cover it with a lid.

2. Mung bean sprouts are suitable to grow in an environment with a temperature of 21-27 degrees. When planting mung bean sprouts, if the ambient temperature is too high, cold water should be used to irrigate the bean sprouts to reduce the temperature around the plant. If the environmental temperature is too high, use warm water to irrigate mung bean sprouts, or place mung bean sprouts on the side of the boiler.

3. Soak beans. First of all, mung beans, red beans and other small beans can be soaked in clear water, here we remember not to soak too much, generally soak in room temperature for a day. Change the water every six hours. After soaking, you can put it in a shallow basin, put a little water, and sow a little bit of buds into the basin soil immediately. Select the container.

How to grow bean sprouts

Mung bean sprouts are suitable to grow in an environment with a temperature of 21-27 degrees. When planting mung bean sprouts, if the ambient temperature is too high, cold water should be used to water the bean sprouts to lower the temperature around the plant, while if the environmental temperature is too high, warm water should be used to irrigate mung bean sprouts, or place mung bean sprouts on the side of the boiler.

The method of planting bean sprouts is as follows: choose beans: choose beans with full grains and free from diseases and insect pests as the seeds for planting bean sprouts. Prepare the container: prepare an undamaged container with some small drainage holes at the bottom. Soak beans: soak seeds in water until they swell and soften.

Water it. Water it several times a day to keep it humid, but don't let the water stay. Don't let the beans see the sun, or they will turn green immediately. Cover with sand to avoid the sun. if you are not at ease, cover the container with a lid. Harvest. The bean sprouts will arch out in a few days. Wash the sand away in clean water.

Sowing: spread the sprouted beans evenly on the substrate and keep a certain spacing so as not to cause poor growth of bean sprouts. Maintain humidity: after sowing, gently spray water with a spray can or faucet to moisturize the seeds, then cover the seeds with wet paper towels or cloth to maintain humidity and keep the right amount of moisture every day.

To grow bean sprouts, you need to choose mung beans with full grains and healthy growth. Then soak the mung beans in clean water, wait for the mung beans to sprout, and then culture them in a shaded container. Until mung beans grow smoothly into bean sprouts. In the process of maintenance, it is necessary to replenish water for the plant in time to provide a more humid growth environment.

Seed selection before planting bean sprouts, we first need to screen the seeds. Buy full and healthy soybeans or mung beans, put them in clean water and wash them many times to remove dust and impurities. In this process, beans floating on the water may be bad or immature and need to be removed. Then soak the screened beans in clear water for about six hours to make them fully absorb water and expand.

How to grow mung bean sprouts

It is very important to select mung beans before planting mung bean sprouts, which is very important. Pay attention to the quality of mung beans, which can affect the germination rate in the later stage. Select the seeds that are round, full and free of diseases and insect pests, and remove the mung bean seeds with impurities, defects and diseases and insect pests in advance. These mung beans are not recommended to be planted, and the germination rate is relatively low.

When choosing seeds to plant mung bean sprouts, it is necessary to choose the annual, full-grained and fully mature mung beans, then soak the mung beans in hot water for a period of time, and then remove them and wash them in cold water for 1-2 times. the dormancy state of mung beans can be broken with temperature, so that the plants can germinate more easily.

Choose the bean seed. Mung beans can be purchased in the market, and seed selection should be carried out before budding to remove impurities such as broken petals, dryness, moth and soil, which is the first step in cultivation. Seed soaking treatment of bean seeds. Soak the selected full mung bean seeds in 1 kg of water and 1 kg of beans, the water temperature can be controlled at 20m / 23 ℃, and the soaking time is generally 6m / m for 7 hours, so that the beans are full and wrinkle-free.

Planting method of self-growing mung bean sprouts

1. Sow seeds. Mung bean sprouts generally rely on the growth of water, so when growing, you can put it in a place with plenty of water, just cover the surface with a layer of shallow soil. When planting, you generally choose to plant in a container, the size of the container should not be too large, so as not to cause management difficulties, if you plant more, you can choose multiple containers for planting.

2. Sprinkle with water. The growth of bean sprouts must have sufficient water, and water can be supplied through regular watering. There are two ways of watering. One is that the amount of water should be more each time, and the bean sprouts should be drenched generally in the whole container, so that the temperature of the water is the same as that of the water coming out. In another way, you can fill the entire container with water and then let it go, which can be repeated three times.

3. When choosing seeds to plant mung bean sprouts, it is necessary to choose the annual, full-grained and fully mature mung beans, then soak the mung beans in hot water for a period of time, and then remove them and wash them in cold water for 1-2 times. the dormancy state of mung beans can be broken with temperature, making plants easier to germinate.

4. go to the supermarket or vegetable market to buy some beans, and then pick out the undamaged, bug-free seeds. It is best to choose the beans that are born in the same year or every other year. The beans that can be planted are soybeans, mung beans, peas and so on, of which mung beans and soybeans are the most common. Soak the selected seeds in water overnight, then remove them and put them in the vegetable basket to drain.

5. Keep the gauze moist and pay attention not to sprinkle too much water each time to avoid root rot. Keep the temperature in the surrounding environment at about 20 degrees, and mung bean sprouts can grow in about three days, which can be picked and eaten. Note: when planting mung bean sprouts, you can also choose to plant them in winter, but be sure to do it in a warm room to avoid freezing to death. The best water quality is well water, which can absorb nutrients and promote growth.

6. Bean seed selection: mung beans can be purchased in the market. Seed selection should be carried out before sprouting to remove impurities such as broken petals, dryness, moth and soil, which is the first step in cultivation. Soaking treatment of bean seeds: the selected full mung bean seeds are soaked in 1 kg of water and 1 kg of beans, the water temperature can be controlled at 20 ℃, and the soaking time is generally 6 mi for 7 hours, so that the beans are fully full and there are no wrinkles.

How to plant bean sprouts fastest?

Soak soybeans: if you want bean sprouts to grow quickly and well, you need to soak soybeans. First, you need to select soybeans that are full and free from diseases and insect pests. Then prepare a basin, pour soybeans into it, and then pour uncontaminated pure water into the basin. Cultivate bean sprouts: when cultivating bean sprouts, you need to put the soaked soybeans in a sieve and maintain them in a warm environment. After waiting for the soybeans to germinate smoothly, you can fish them out.

Seed selection preparation: before planting bean sprouts, soak soybeans or mung beans in water for about five hours. Get rid of floating and bad beans. The more round the beans look, the better. Keep the seeds moist before sprouting, so as to keep the seeds alive.

Mung bean sprouts are suitable to grow in an environment with a temperature of 21-27 degrees. When planting mung bean sprouts, if the ambient temperature is too high, cold water should be used to water the bean sprouts to lower the temperature around the plant, while if the environmental temperature is too high, warm water should be used to irrigate mung bean sprouts, or place mung bean sprouts on the side of the boiler.

Humidity control: keep the planting medium moist, preferably by spraying water to control humidity. But be careful not to let the water accumulate at the bottom so as not to cause the bean sprouts to rot quickly. Light and temperature: bean sprouts need plenty of light to germinate, put the container in plenty of sunlight, or use artificial light sources. The appropriate temperature can promote the rapid germination of bean sprouts, usually maintained at about 20-25 degrees Celsius.